ESR Motor Systems - Toshiba Electric Motors

Electric Motors

Toshiba specializes in building the most durable electric motors on the market today. Their focus is on integral horsepower general purpose and severe duty motors as well as quarry duty, oil well pump, dry kiln, vertical solid shaft and washdown duty definite purpose motors. ESR keeps a large inventory of Toshiba motors and ranks as one of Toshiba's largest motor distributors in the nation.

General Purpose Motors

Series: EQPGlobal-SD, EQP-III

Description:

Toshiba's general purpose motors meet EISA 2007 premium efficiency requirements and feature high torques and low vibration levels yet are still competitively priced making them some of the lowest cost-of-ownership products in the industry.

HP: 3/4 to 700	Voltage(s): 230/460, 190/380, 575
Enclosure(s): TEFC, ODP	Construction: Cast Iron

Standard Features:*

IP54 protection
50/60Hz nameplate data (1-75HP)
Inverter Duty (20:1CT, 60:1VT 1-200HP 4 & 6 Pole)
Oversized bearings (DE & ODE)
Multi-Mount on 140-445 & N449 frames
Vibration: 0.08 in/sec or less
Cast iron terminal Box

Warranty: 3 Years

Applications: Pumps, fans, compressors, conveyors, material handling, general applications

Brochures: EQP Global Flyer, EQP-III Brochure

*Standard features may vary between TEFC and ODP motors

Severe Duty Motors

Series: EQPGlobal-840

Description:

Toshiba's severe duty motors meet EISA 2007 premium efficiency requirements and with many key features of IEEE-841 motors are designed to specifically address the needs of the mill and chemical industries.

HP: 3/4 to 500	Voltage(s): 230/460, 460, 190/380, 380, 575
Enclosure(s): TEFC	Construction: Cast Iron

Standard Features:

IP54 or IP56 protection
All cast iron including fan cover & T-box
50/60Hz nameplate data (1-75HP)
Inverter Duty (20:1CT, 60:1VT 1-200HP 4 & 6 Pole)
Oversized bearings (DE & ODE)
Multi-Mount on 140-445 & N449 frames
Vibration: 0.06 in/sec or less
Open regreaseable bearings 280 frame+
Shaft/slinger protection 140-280 frame
Labrynth seal 320 frame+ both ends
Protective coating on all internal machined surfaces

Warranty: 3 Years

Applications: pumps, fans, compressors, conveyors, mixers, material handling in tough environments

Brochures: EQP Global-840 Flyer

IEEE-841 Motors

Series: EQPGlobal-841

Description:

The EQPGlobal-841 motor specifically addresses the needs of the petrochemical industry where premium performance and reliability are imperative. This product is designed for indoor and outdoor use in the harshest environments where premium performance and reliablity are a must.

HP: 3/4 to 300	Voltage(s): 460, 575
Enclosure(s): TEFC	Construction: Cast Iron

Standard Features:

IP56 protection
All cast iron including fan cover & T-box
Inverter Duty (20:1CT, 60:1VT 1-200HP 4 & 6 Pole)
Oversized bearings (DE & ODE)
Open regreaseable bearings all frames
Vibration: 0.04 in/sec or less
Shaft/slinger protection 140-280 frame
Labrynth seal all frames both ends
Protective coating on all internal machined surfaces

Warranty: 5 Years

Applications: Pumps, fans, compressors, conveyors, mixers, material handling in extreme environments

Brochures: EQP Global-841 Flyer

Explosion Proof Motors

Series: EQP-III XP

Description:

Toshiba's explosion proof motors meet EISA 2007 premium efficiency requirements and are built to meet the UL and CSA Listed Hazardous Locations requirements. This product line is designed for use in Class I, Division 1, Group D, Class II, Division 1, Groups E, F, and G and carries a temperature code rating of T3B (165 C). It is ideal for indoor and outdoor use and offers the performance and reliability the motor industry has come to expect from Toshiba

HP: 3/4 to 350	Voltage(s): 230/460, 460, 575
Enclosure(s): TEFC	Construction: Cast Iron

Standard Features:

IP55 protection
All cast iron including fan cover & T-box
Inverter Duty (20:1CT, 60:1VT 1-200HP 4 & 6 Pole)
Non-sparking brass shaft slingers
Normally-Closed thermostats
Ball bearing 143T-405T
Roller bearing 444T+ (4 & 6 pole)
UL Listed file #E312568
CSA certified file #046728

Warranty: 3 Years

Applications: Petrochemical & gas, grain & feed mills, pharmaceuticals, pumps, fans, compressors, conveyors, material handling in UL & CSA Listed hazardous locations

Brochures: EQP-III Explosion Proof Brochure

Quarry Duty Motors

Series: XT Quarry Duty

Description:

Toshiba's Quarry Duty motor series has a proven track record of exceeding the extreme demands of the cement and aggregate industries. These motors provide exceptional high torque, oversized superior-grade roller bearings, and shafts built with high strength 4142 steel.

HP: 75 to 600	Voltage(s): 230/460, 460, 575
Enclosure(s): TEFC	Construction: Cast Iron

Standard Features:

Inverter Duty
Open re-greaseable bearings
Cast iron T-box
V-Ring shaft seal
Grade-5 hardware on 364T & 405T
Grade-8 hardware on 444T+
Bearing lock nuts on 444T+ for vertical applications
Roller bearings on 444T+

Warranty: 2 Years

Applications: Ball & rolling mills, centrifuges, chippers, cone crushers, conveyors, debarkers, grinding mills, hammer mills, jaw crushers

Brochures: Quarry Duty Brochure, Mining Solutions Brochure,

Washdown Duty Motors

Series: Toshwash SS

Description:

Toshiba's premium efficiency Toshwash stainless steel motors have been built to meet the extreme demands of the food and pharmaceutical industries. Working with several major users in these industries, Toshiba developed one of the toughest motors available. This specially designed motor approaches five times the normal life cycle of other commercial washdown duty motors and offers the widest variety of TENV frame sizes available.

HP: 1/2 to 5	Voltage(s): 230/460, 460, 575
Enclosure(s): TENV, TEFC	Construction: Stainless Steel

Standard Features:

Inverter Duty
C-face footed or C-face round body
Multiple dips & bakes for moisture protection
Stainless steel frame, brackets, fan cover, and shaft
Ground & polished shaft seal fits
High strength double-lip teflon shaft seals
O-Ring seals between frame & bearing brackets
Double O-Ring sealed conduit box
Neoprene lead separator between frame & T-box
Laser engraved nameplate
Removable drain plugs every 90 deg. for universal mounting

Warranty: 3 Years

Applications: Food industry, meat processing & packing, dairy industry, pharmaceutical, beverage & bottling, canneries, pumps, blowers, conveyors, gear reducers

Brochures: Toshwash Brochure

Vector Ready Motors

Series: XT Vector

Description:

Toshiba's premium efficiency Vector Ready motor is designed for the extreme operational requirements of today's variable speed applications. It is built to survive in the most demanding environments requiring tight vector control. The Vector Ready motor is specifically designed for indoor and outdoor inverter operation and is not intended for conventional across-the-line operation.

HP: 1 to 350	Voltage(s): 460, 575
Enclosure(s): TEFC, TENV	Construction: Cast Iron

Standard Features:

Inverter Duty
143T - 256T TEFC or TENV
284T through N449T TEFC or TEBC
Double shaft extensions for encoder mounting
Double C-Face TENV 143T - 256T
Normally-closed thermostats (155 C)
C-Face footed and round body available
Constant HP
Constant torque 2000:1 for TEBC, TEFC, & TENV (vector control mode)
Constant torque 20:1 for TEFC & TENV (V/f mode only
Equivalent circuit data on nameplate
Rotor intertia on nameplate
Large variety of encoder options

Warranty: 3 Years

Applications: Material handling, metal processing, plastic extrusion, textile processing, test stands, winders & slitters, presses, pumps

Brochures: Vector Ready Brochure

Brake Motors

Series: EQP-III, EQP-840

Description:

Toshiba's premium efficiency brake motor is designed to meet the needs of general holding applications. This product is built to withstand the toughest conditions and offers some of the highest efficiency and torque ratings while producting some of the lowest vibration ratings in the industry. It is suitable for indoor and outdoor use.

HP: 1/2 to 30	Voltage(s): 230/460, 460, 575
Enclosure(s): TEFC	Construction: Cast Iron

Standard Features:

General purpose & severe duty
Inverter Duty
V-Ring seal on drive end
C-Face footed and footless
Solenoid actuated spring-set brakes
NEMA 2, NEMA 4, & NEMA 4X enclosures
Multiple options for brake voltages
Manual release lever on brake housing
Wear adjustment
Static torque ratings from 3 to 125 lb. ft.

Warranty: 3 Years

Applications: Conveyors, gear reducers, door lift operators, material handling, baggage handling, carousels & palletizing, holding applications

Brochures: Brake Motor Brochure

Dry Kiln Motors

Series: XT Dry Kiln

Description:

Toshiba's open drip proof, high efficiency, Dry Kiln motor incorporates a new and improved insulation system into the premium open drip proof design. This allows for running the motor in higher ambient temperatures. The Dry Kiln motor motor is designed for indoor and outdoor use in even the harshest dry kiln environments. High ambient temperatures, high humidity, and chemicals present no problem to this motor due to its corrosion-resistance and high structural rigidity.

HP: 3 to 25	Voltage(s): 460, 575
Enclosure(s): ODP	Construction: Cast Iron

Standard Features:

Inverter Duty
Special windings for high humidity & corrosive atmospheres
90, 115, & 135 deg. celcius designs
8-Foot Class H leads
High temperature bearing grease

Warranty: 1 Year

Applications: Soft wood dry kilns, hard wood dry kilns, high temperature fans, oven conveyors

Brochures: Dry Kiln Brochure

Oil Well Pump Motors

Series: CT Oil Well Pump

Description:

Toshiba's open drip proof, high efficiency, Oil Well Pump motor is equipped to handle the harshest of environments including installations in remote locations where the motor cannot be easily accessed. These motors are specifically built for use in the oil industry and offer a high-slip, high-torque design with protective screens to safeguard against outdoor elements.

HP: 5 to 100	Voltage(s): 230/460/796
Enclosure(s): ODP	Construction: Cast Iron

Standard Features:

IP22 protection
NEMA Design D - 5% to 8% slip, 275% or higher locked rotor torque
F2 assembly
Normally-closed thermostats
Corrosion-resistant screens
Lithium base grease
Y-Delta starting (240/460V only)

Warranty: 2 Year

Applications: Oil well pumps, presses, lifts, high slip, Design D

Brochures: Oil Well Pump Brochure

Vertical Solid Shaft Motors

Series: XT Vertical P-Base

Description:

Toshiba's TEFC Vertical P-Base Footless motor is designed with the petrochemical and material processing industries in mind. Toshiba's LP design meets API 610 specifications for chemical processing and all motors include a patent-pending lubrication system that provides improved flow and circulation of grease and oil for longer bearing life. The Vertical P-Base motor can be used in indoor and outdoor applications and is available in normal and medium thrust as well as high and premium efficiencies.

HP: 3 to 400	Voltage(s): 460, 575
Enclosure(s): TEFC	Construction: Cast Iron

Standard Features:

IP54 mill & chemical duty
High & NEMA premium efficiency
Inverter Duty
All cast iron
Normal & medium thrust
Positive displacement grease lubrication system
Labyrinth seal on top bracket
Base brackets in various diameters
Labyrinth seal option for drive end
520 to 1750 lbs. down thrust (minimum L-10 at 17,500 hours)
Standard grease lubrication (field-modifiable for oil-mist lubrication)

Warranty: High Efficiency: 1 Year, Premium Efficiency: 3 years

Applications: Booster pumps, centrifugal pumps, non-clog pumps, in-line pumps, vertical turbine pumps

Brochures: Vertical Motor Brochure

Medium Voltage Motors

Series: XT Open Enclosure, Dura-Bull TX, Air-to-Air

Description:

Toshiba features Medium Voltage ODP, WPI, WPII, TEFC, and TEAAC motors. Open enclosure motors are recommended for indoor use while TEFC and TEAAC motors are designed for indoor and outdoor use. These motors offer some of the highest efficiency and torque ratings while producing some of the lowest vibration ratings in the industry. These motors offerings are completely customizable due to Toshiba's in-house design, engineering, and manufacturing capabilities.